CallBook a Pump

Service · Australia-Wide

High-Pressure Concrete Pump Hire — Australia-Wide

High-pressure twin-cylinder pumps for vertical pours over 100m, long horizontal runs and demanding mixes. The workhorse behind every major high-rise and tunnel project.

Overview

What is High-Pressure Pump Hire?

A high-pressure concrete pump is a twin-cylinder, hydraulically driven pump capable of pushing concrete vertically over 100 metres and horizontally for hundreds of metres through steel pipeline. Working pressures typically range from 130 to 250 bar, with outputs from 60 to 200 m³/hr depending on cylinder size and mix design. High-pressure pumps feed satellite placing booms on high-rise sites, push shotcrete and primary linings in tunnels, and handle stiff structural mixes that softer pumps can't move. Every unit comes with a qualified operator and a pipeline crew briefed on the route, pressure rating and wash-out plan.

Use cases

When do you need high-pressure pumps?

High-rise pumping above 60m

Push concrete to placing booms on every level of a tower build.

Tunnel and underground works

Long-distance pipeline runs to deep or remote placement points.

Mass concrete and stiff mixes

Move low-slump structural concrete that conventional pumps stall on.

Pipeline runs over 250m

Maintain output across extended horizontal or angled pipelines.

Process

How it works

01

Quote

Tell us the date, address, mix and volume. We confirm price and pump in minutes.

02

Schedule

We assign the right approved operator and lock in your delivery window.

03

Pour

Pump arrives, sets up and places your concrete — clean, fast and on the day.

Equipment

Equipment specs

Pump / SetupReachOutputSuitable For
Standard High-PressurePipeline 250m / vertical 100m60 m³/hrMid-rise, tunnels, long runs
Heavy-Duty High-PressurePipeline 400m / vertical 200m100 m³/hrHigh-rise, tier 1 civil
Twin-Pump High-PressureVertical 300m+160 m³/hrMega-towers, mass concrete

FAQ

Frequently asked questions

What's the difference between a standard line pump and a high-pressure pump?

A standard line pump runs at 60–100 bar and handles short-to-medium pipeline runs. A high-pressure pump runs at 130–250 bar and is purpose-built for vertical lifts above 60m, long pipelines or stiff structural mixes.

How high can a high-pressure pump push concrete?

Standard units lift around 100m vertically; heavy-duty twin pumps can exceed 300m. Mix design, pipeline diameter and pressure rating all factor in.

Do you supply pipeline and rigging?

Yes. The high-pressure pump comes with the rated pipeline, couplings, wall brackets and a qualified pipeline crew.

Reviews

What builders say about high-pressure pumps

5.0 / 5 · 247 reviews
Booked a 42m boom pump in Sydney with one phone call. Operator was on site early, set up clean and the pour went perfectly. This is how procurement should work.
Mark T.
Site Manager · Sydney, NSW
We use Aussie Concrete Pumpers across every Melbourne project now. Reliable operators, real coverage in the suburbs, no chasing trucks on pour day.
Renee K.
Construction Director · Melbourne, VIC
Needed a line pump for a tight Brisbane back yard slab. Quote in 10 minutes, pump booked next day. Friendly operator, fair price, top job.
Dave H.
Owner-Builder · Brisbane, QLD

Get a quote for High-Pressure Pump Hire

Call 0479 12 78 67 or request online — same-day dispatch Australia-wide.